Fitment Type: Direct Replacement. Interchange Part Number: 95201-80JA1, 9520180JA2, 95201-80JA2, 60-02385 NA, 60-02385NA, 16002385-101. Other Part Number: 9520080JA0, 95200-80JA0, 9520080JA1, 95200-80J. Superseded Part Number: 16002385, 95200-80JA2, 9520180JA0, 95201-80JA0. 2007 – 2009 Suzuki SX4 All Models. Installation Manual Is NOT Included. Professional Installation Is Highly Recommended. Please make sure it will fit your machine before purchasing it. Please check pictures for more details. 1 x Air Compressor with Clutch. INSTALLING THE NEW or REMANUFACTURED A/C COMPRESSOR. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed. Flush evaporators from inlet to outlet. Flush condensers from outlet to inlet. Add oil to your system. Install the new receiver drier or accumulator, and new expansion valve or orifice tube. Next, install the new or remanufactured A/C Compressor. Install and tighten the A/C Compressor mounting bolts. Reconnect any electrical connectors to the A/C Compressor. Re-install the refrigerant lines and A/C belt to the A/C Compressor. Reconnect the negative battery cable. Evacuate the A/C system with an A/C servicing machine for at least one hour. Check the system for leaks. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system. Start the vehicle’s engine and turn on the A/C system. Make sure the windows and doors of the vehicle are open.